Bumper- Rear

• Smitty Bilt Apollo JL/JT Rear Bumper

See All

• Stainless Steel
• Weather Resistant
• Pair
• Hardware Included
• Limited 5 Year Warranty

See All

• Classic Rock Crawling Rear Bumper

See All

• Black Powder Coated
• Factory hitch must be removed
• Accommodates OEM Back up Sensors

See All

• Mount Kit Sold Separately
• Popular Diamond Tread Design
• Full Size Tongue Weight of 800 lbs. And 8000 lbs. Trailer Weight
• Downsize and Compact Are 350/3500 lb. Weights
• V5 Tested Certified To SAE J684

See All

• Protects Vehicle From Damage Against Wildlife And Road Debris
• Provides Added Safety To Driver And Vehicle
• Heavy Duty Diamond Plate Steel
• Honeycomb Mesh Protects Grille/Gives Maximum Airflow
• 1.5 in. Headlight Protection Tubes
• 2 in. Full Wraparound Wings Ties Into Bumper
• Provisions For Factory Parking Sensors
• 2 in. Receiver Hitch/Heavy Duty 9500 lbs. Bow Shackle Mounts
• Compatible For Factory Fog Lamps Or LED Post Mount Lights
• Custom Die Cast Riveted Logo Badge
• Mounting Provisions For License Plate
• Hardware Mounting Brackets Included

See All

• 7 Gauge Steel
• 1-Piece Fully Welded Construction
• 1 in. Thick HS Shackle Mounts
• Two Flush Mount Led Lights Included
• License Plate Illumination Lights Included
• Laser-Cut HDX Logo On Ends
• Application Specific Designs
• Mounting Brackets Included
• Available With Or Without Provision For Back-Up Sensors
• Available In Textured Black Finish Or Raw

See All

• Satin Black Finish
• Massive Recovery Hooks
• Built-In Jack Lifting Points
• Limited 5 Year Warranty

See All

• Direct Fit
• Manufactured From 3/16 and 1/4 Cold Roll Steel
• Solid Mount D-Rings Welded On The Inside And Out
• Two Stage Matte Black Finish Powder Coat Finish - 5 Year Limited Warranty
• Smittybilt Advantage Warranty

See All

• M1A2 Modular Rear Bumper For 14-18 Chevy Silverado

See All

• Mount Kit Included
• 2 In. Diameter Tube Frame
• Optional Class III/IV Hitch Available. Sold Separately
• Retractable License Plate Holder Conceals Receiver Hitch
• Equipped With Mount Points For Optional Auxiliary Lights
• Available For Vehicles With Or Without Backup Sensors
• Bolt-On Installation; No Drilling Required

See All

• Signature Series Step Pad
• Complete Assembly
• Molded Polymer Step Pads
• V5 certified
• Interchangeable Components
• 3 Year Warranty

See All

• Increases Ground Clearance And Angle Of Approach
• Constructed Of 10 Gauge Steel For Strength And Style
• Compatible For Blind Spot Monitors And Parking Sensors
• Accommodate For Oem Hitch And Led Back Up Lights
• Configured To Accept 2 Fm6 Led Flush Mount
• Custom Laser-Cut Westin Logo
• Hardware And Mounting Brackets Included
• Bolt-On Installation - No Drilling Required

See All

• Mounting Brackets Will Vary With Make/Model

See All

• Brushed Aluminum Skid Plate Included- Works with Factory Hitch
• Fully Welded 1-piece construction- 1.75 in. .095 Wall Tubing
• Pre-Runner Style
• 5 year Finish Warranty- Lifetime Workmanship Warranty

See All

• Direct Fit
• Dual Gloss Black Powdercoat Painted Finish
• Dense Zinc Treated Undercoating
• Expertly Robotically Welded
• Bumper Bolts Directly On To Vehicle
• 2 in. Receiver Hitch
• 5 Year Limited Warranty

See All

• Gloss Black
• Allows Oversized Spare Tire
• Welded End Caps
• Limited 5 Year Warranty

See All

• 7 Gauge Steel
• 1-Piece Fully Welded Construction
• 1 in. Thick HD Shackle Mounts
• Two Flush Mount Led Lights Included
• Welded Hitch Receiver
• Laser-Cut Snyper Logo On Ends
• Mounting Brackets Mount Directly To Frame
• Textured Black Finish

See All

• With Receiver
• No D-Ring Mounts

See All

• Black
• Tube style
• Raised Ends For Better Ground Clearance
• Built in Hitch For Accessories; Not Designed for Towing
• Limited 5 Year Warranty

See All

• Black
• Stamped Steel
• Fits Up To 7/8 in. D-Rings; Not Included
• Efficient Stamping Process Used
• Creates A Product Lighter Than Most Aftermarket Steel Bumpers
• Sturdy 11 Gauge Powder Coated Steel Construction

See All

• 1 Piece
• Body Width Profile

See All

• Easy Access To Factory Tow Hitch
• No Drill Installation
• Black Powder Coated
• Accommodates Factory Park Assist Sensors

See All

• Raised corners for better entry and exit under the most extreme conditions
• Accommodates 3X3 Cube Led Lights
• Integrated 3/4 in. D-Ring Mounts
• Class Iii Receiver Hitch
• Integrated Jack Points
• Perfect Mid Width Design

See All

• Direct Fit
• E-Coat Undercoated With Dual Stage Textured Black Powder Coat
• Heavy-Duty 1/4 in. Steel Plate Design
• Three Point Mounting System Supports Over-Sized Tires
• Special Lock Design Keeps Tire Carrier Secure While Off-Roading
• 5 Year Limited Warranty

See All

• New solid D-ring and jack point mount - welded on the inside and out!
• Aggressive design for with raised corners for better entry and exit angles for the most extreme conditions
• UHMW ;ultra-high-molecular-weight polyethylene to provide the ultimate protection for rock crawling
• Aux back up light cut out provided
• 3/16-inch cold rolled steel with two-stage textured matte black finish
• Powder coat finish 5 year limited warranty
• Smittybilt limited lifetime warranty
• Modular design; tire carrier can be added in the future.
• Class III hitch for true towing with towable d-ring

See All

• Direct Fit
• Black Powder Coat
• Dense Zinc Treated Undercoating
• Two Stage Textured Black Powder Coat Finish
• Expertly Robotically Welded
• Bumpers Bolt Directly To Your Vehicle
• Bumper Is 2 in.X.120 in. Wall
• 2 in. Receiver Rated Class III 9;000 LBS.

See All

• Not Vehicle Specific
• 3mm Deep Drawn Formed Steel
• Winch Compatible Up To 12K
• Includes Modular Wings With Light Provisions
• Integrated D-Ring and Lift Points
• Oe Fog Light Provision
• Integrated Overrider With 13 in. Lightbar Provision

See All

• Cold Rolled Brite Steel
• OE Style Steel Step Plate
• Molded Polymer Surface
• Mount Kit Sold Separately
• 3 Year Warranty

See All

• Functional Design
• Works With 2 in. Receiver Tow Hitch
• Contoured Corners
• Allows Clearance For Spare Tire
• Black Powdercoat Finish
• 3 Year Warranty

See All

• RotoPax Mount

See All

• 3/16-Inch Plate Steel Construction
• Designed To Work With Factory Or Westin Hitches
• Integrated Recovery Shackle Mount Points
• Auxiliary Light Mount Points
• Rock Light Mount Points
• 2 Off-Road Jack Points
• No Drilling Required - Bolt On Installation
• Includes Bumper; Mounting Hardware And Install Instructions

See All

• Fits up to 37 in. tires
• Class III tow rated
• New cam-style pin adjustment
• Easy 2 finger opening latch
• Double catch latch eliminates accidental opening
• MOLLE Pals compatible to allow multiple pouch mounting configurations
• Stainless steel pivot washer for longer wear life
• 3rd brake light bracket included
• integrated gas can and jack mounts

See All

• Bolt-on design for XRC GEN2 bumpers
• Frame pivot point for added strength
• Tuned one-handed opening operation; tuned to factory tailgate
• CB and jack mounts and Roto Pax® gas can holder
• Manufactured from 3/16 in. cold rolled steel
• Two-stage textured matte black finish

See All

• 18-Current Wrangler JL; 2-4 Door
• Adjustable Slant Tire Carrier
• Convertible Rotopax Mount Can Be Installed In Either Straight Or Slant Tire Configurations
• Included Adjustable 3rd Brake Light Bracket
• Retains OE Camera Location And Functionality
• Removable Trail Jack And Aerial Antenna Mount
• Steel Vent Cover
• Roller Bearing Pivot
• Fits Up To 40 in. Tire; With Single-Action Open And Close Feature

See All

• Direct Fit
• 2 And 4-Door Models
• Two Stage Matte Black Textured Powder Coat Finish

See All

• Textured Black
• Incl. XHD Frond Winch Mount Bumper And Double-X Striker Bar
• Incl. Standard Bumper Ends
• Modular Design
• Steel

See All

• Textured Black
• Incl. XHD Frond Winch Mount Bumper And Double-X Striker Bar
• Incl. Standard Bumper Ends
• Modular Design
• Steel

See All